$ 0.036 6.62%
KREDS (KREDS) Rank 3609
The Kreds currency will be used by our team to create an ecosystem of world utility, action-based reward, and currency within several media and news websites. To satisfy the enjoyment of subscribers and users of our sites, small amounts of Kreds will be awarded to users for engaging in certain actions and content. Once an established market and exchange is reached, Kreds currency will then be added for subscription payment for business services and more.
Mkt.Cap | $ 0.00000000 | Volume 24H | 0.00000000KREDS |
Market share | 0% | Total Supply | 1.1 BKREDS |
Proof type | PoW | Open | $ 0.03 |
Low | $ 0.03 | High | $ 0.04 |
Kreds & Virtual Goods
Mining script found in the photo of the deceased Kobe Bryant
This system voltage is slightly above the ELV limit but still very commonly used for cord powered hand tools and temporary lighting in hazardous areas. As it is transformer derived, the exposed voltage during an earth fault is depressed below the ELV level. Examples for FELV circuits include those that generate an extra low voltage through a semiconductor device or a potentiometer or a transformer. A typical example is an electronically controlled toaster where the timer circuit runs off extra low voltage derived from a tap on the heating element. Another is the old door-bell circuit fed from a transformer.
The term functional extra-low voltage (FELV) describes any other extra-low-voltage circuit that does not fulfill the requirements for an SELV or PELV circuit. Although the FELV part of a circuit uses an extra-low voltage, it is not adequately protected from accidental contact with higher voltages in other parts of the circuit. Therefore the protection requirements for the higher voltage have to be applied to the entire circuit.
Merge business site users with Kreds blockchain community through carefully calculated teaching and site transition of Kreds reward/payment model. 1.Transition current/future mainstream site users and subscribers smoothly from our on-site rewards model into blockchain wallet software use and familiarity with cryptographic coins. The Kreds currency will be used by our team to create an ecosystem of world utility, action-based reward, and currency within several media and news websites.
File:Over Jerstal-Kreds.png
In contrast to a SELV circuit, a PELV circuit can have a protective earth (ground) connection. A PELV circuit, just as with SELV, requires a design that guarantees a low risk of accidental contact with a higher voltage.
The client API initiates purchases and can also check the user's inventory, which is useful for single-player game unlocks like map packs and advanced features. For games that have consumable items and currency sales, the server-side API enables the game to "use" (decrement the count of) an item in the player's Kongregate inventory. To satisfy the enjoyment of subscribers and users of our sites, small amounts of Kreds will be awarded to users for engaging in certain actions and content. Once an established market and exchange is reached, Kreds currency will then be added for subscription payment for business services and more.
Protected extra-low voltage (PELV)
Some types of landscape lighting use SELV / PELV (extra-low voltage) systems. Modern battery operated hand tools fall in the SELV category. In more arduous conditions 25 volts RMS alternating current / 60 volts (ripple-free) direct current can be specified to further reduce hazard. Lower voltage can apply in wet or conductive conditions where there is even greater potential for electric shock.
Kreds (KREDS) is a digital currency, or crypto as it is commonly referred to. Kreds (KREDS) is currently valued at $0 per coin. The price moved in the last 24 hours 0.00%. It had a volume of $0 that was traded in the past 24 hours too.
- Kreds (KREDS) is a digital currency, or crypto as it is commonly referred to.
- Therefore the protection requirements for the higher voltage have to be applied to the entire circuit.
- Kreds (KREDS) is currently valued at $0 per coin.
- A PELV circuit, just as with SELV, requires a design that guarantees a low risk of accidental contact with a higher voltage.
For a transformer, this can mean that the primary and secondary windings must be separated by an extra insulation barrier, or by a conductive shield with a protective earth connection. IEC defines a PELV system as "an electrical system in which the voltage cannot exceed ELV under normal conditions, and under single-fault conditions, except earth faults in other circuits".
What is Kreds?
The design of a SELV circuit typically involves an isolating transformer, guaranteed minimum distances between conductors and electrical insulation barriers. The electrical connectors of SELV circuits should be designed such that they do not mate with connectors commonly used for non-SELV circuits. Transfer the Kreds currency to several sites easing more mainstream public users into the use of and knowledge of cryptographic blockchain freedom.
Kreds & Virtual Goods
Voltage drop is usually the main factor considered, but current-carrying capacity is as important when considering short, high-current runs such as between a battery bank and inverter. The IET / BSI (BS 7671) also define Reduced low voltage (RLV) which can be either single phase or three phase A.C. This system has been used for many years on construction sites. though having a "centre tapped Earth" reducing the voltage to Earth to 55 V a.c. The three phase is 110 V phase to phase, 63 V to Neutral / Earth.
PUSH - OBJECTS Handle Description PROGRAMS Kreds PUSH TAGS TAGS TAGS TAGS TAGS TAGS TAGS TAGS TAGS CONNECTIONS Charged Discharged VERBS Name Favors Relationship Adjective
These systems should still fall under the SELV / PELV (ELV) safety specifications. SELV, PELV, FELV, are distinguished by various safety properties, supply characteristics and design voltages.
Kreds (KREDS) has a maximum supply of 0 KREDS coins. KREDS can be traded at the above exchanges. The Kreds API allows users to purchase virtual items in your game using Kongregate's "kreds" currency. The API includes both client and server-side components.
Cabling for extra-low voltage systems, such as in remote-area power systems (RAPS), is designed to minimise energy losses while maximising safety. Lower voltages require a higher current for the same power. The higher current results in greater resistive losses in the cabling. Cable sizing must therefore consider maximum demand, voltage drop over the cable, and current-carrying capacity.